SPL Phonitor se Headphone Amplifier (Red)

Description

Phonitor se

Our entry model into the world of VOLTAiR headphone
amplifiers.

The Phonitor se has the same audio signal amplification
as its bigger brothers Phonitor x and Phonitor xe and therefore
offers the same sound experience.

Volume & Source Selection

The volume is adjusted with a milled all-aluminum rotary
knob. The Alps RK27 “Big Blue” potentiometer provides a pleasant “spoon in
honey” turning feeling.

 

Headphone Output with Power

The Phonitor se offers a 6.35 mm jack for connecting
headphones with jack plug.

Up to 2 x 5 watts of output power is available at this
socket. This allows even very power-hungry headphones such as magnetostats or
electrostats to be driven effortlessly.

The Revolution

in the headphone amplifier is the Phonitor Matrix,
with switchable crossfeed, that allows you to listen to music through
headphones with the sound experience of listening through speakers.

The tiring super stereo effect and the exaggerated
reproduction of reverberation and effects are a thing of the past.

Enjoy your music without fatigue and exactly as it should be
heard.

The Phonitor Matrix in its largest expansion stage has three
setting parameters: Crossfeed, Speaker Angle and Center Level.

In Phonitor se the Center Level is preset to -1 dB and the speaker placement
Angle to 30°. These are the most common values.

The Crossfeed function determines the crosstalk of the
channels, the so-called interaural level difference. There are two switch
positions C1 and C2 for the intensity of the Crossfeed.

Connections

The Phonitor se is equipped with gold-plated RCA sockets for
the analog input.

 

Analog input: RCA

Maximum input gain
32.5 dBu

Input impedance
20 kΩ

 

Standard Headphones Output, 6.35 mm (1/4″) TRS Jack

Wiring
Tip = Left, Ring = Right, Sleeve = GND

Source impedance
0.18 Ω

Damping factor (40 Ω)
180

Frequency range (-3dB)
10 Hz – 300 kHz

Crosstalk (1 kHz)
-90 dB

THD + N (10 Hz – 22 kHz, 0 dBu)
0.00091 %

Noise (A-weighted)
-103 dBu

Output power (1 kHz, 1% THD, 600 Ω)
2 x 2.7 W

Output power (1 kHz, 1% THD, 300 Ω)
2 x 5 W

Output power (1 kHz, 1% THD, 32 Ω)
2 x 1 W

Dynamic range
135.5 dB

Internal Linear Power Supply with Shielded Toroidal
Transformer

Operating voltage for analog audio
+/- 60 V

Operating voltage for relays and LEDs
+12 V

 

Mains Power Supply

Mains voltage (selectable, see fuse chamber)
230 V AC / 50; 115 V AC / 60 Hz

Fuse for 230 V
T 315 mA

Fuse for 115 V
T 630 mA

Power consumption
max. 30 VA

Stand-by power consumption
< 0,3 W

Dimensions & Weight

W x H x D (width x height incl. feet x depth)
278 x 57 x 300 mm
11 x 2.24 x 11.81 inch

Unit weight
2,8 kg
6.17 lbs

Shipping weight (incl. packaging)
5 kg
11.02 lbs