Audio-Technica AT-LP5X Fully-Manual Direct-Drive Turntable (Black)

Description

AT-LP5X Fully Manual Direct Drive Turntable

The AT-LP5x features upgraded technology, including a direct
drive, 3-speed (33-1/3/45/78 RPM) motor, MM/MC phono pre-amp and USB
capability, which are all housed in a mass damped high-density polymer cabinet.

Committed to a Permanent Quest for Quality

Turntable with High-Fidelity Heritage

Born of Audio-Technica’s rich analog heritage, the AT-LP5X
incorporates a J-shaped tonearm that takes its inspiration from the classic A-T
models of the 1960s and ’70s.

Upgraded Features

Latest Technology, Contemporary Style

This next-generation LP5 turntable pushes the acclaimed
performance of its predecessor to new heights, with upgraded features like the
versatile AT-VM95E cartridge and a preamp gain switch to accommodate both
moving magnet and moving coil cartridges.

Cartridge Assembly Line circa 1962

Delivering Analog Excellence for Over 55 Years

We got our start in Tokyo in 1962, designing and
manufacturing high-performance phono cartridges. That half-century’s worth of
analog expertise goes into every turntable we produce, ensuring you get the
best listening experience from your vinyl.

Building on Audio-Technica’s analogue heritage and over 50
years of Japanese audio design, the AT-LP5x features upgraded technology while
keeping the contemporary style and acclaimed performance of its predecessor,
the AT-LP5.

The LP5x retains the J-shaped tonearm, a design inspired by
the classic Audio-Technica models of the 1960s and ’70s, and features a
metallic gimbal suspension system and precision bearings to mitigate tracking
errors. The tonearm also includes an adjustable counterweight and anti-skate
control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the
black AT-VM95E Dual Moving Magnet stereo cartridge.

Constructed of anti-vibration damping materials with
heavy-mass metal chassis inserts, the AT-LP5x turntable has been designed to
limit low-frequency acoustical feedback. Its precision-machined, die-cast
aluminum platter is powered by a direct-drive, low-noise motor, ensuring
stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping
mat, which isolates from low frequency feedback while providing a highly stable
surface for all LP formats, tops the platter.

The AT-LP5x features a built-in switchable MM/MC phono/line
preamp that enables it to connect directly to a computer, home stereo, powered
speakers and other components that have no dedicated turntable input. The
selection of MM/MC cartridges allow for an easy upgrade to a moving coil with
additional equipment. The turntable is also equipped with a USB output for
direct connection to a computer.

• Direct-drive,
  low noise motor

• Fully
  manual operation with three speeds: 33-1/3, 45 and 78 RPM

• AT-VM95E
  Dual Moving Magnet stereo cartridge (black) with replaceable stylus

• Lightweight
  AT-HS6 headshell

• J-shaped
  tonearm, modeled after original Audio-Technica designs from the 1960s and
  ’70s, are engineered to minimize tracking errors

• Switchable
  MM/MC built-in pre-amplifier and line enables connection to components
  with or without a dedicated phono input

• Anti-resonance,
  die-cast aluminum platter

• Heavy
  rubber damping mat for improved low-frequency reproduction

• AC
  adapter handles AC/DC conversion outside of the chassis, reducing noise in
  the signal chain

• Elegant
  matte black finish

• Includes
  dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable

• Included
  dust cover and mounting hardware

Turntable
Type	3-speed, fully manual operation
Motor	DC motor
Drive Method	Direct Drive
Speeds	33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter	Die-cast aluminum
Starting Torque	>1.0 kgf.cm
Braking System	Electronic brake
Wow and Flutter	<0.2% WRMS (33 RPM) at 3 KHz
Signal-to-Noise Ratio	>50 dB
Output Level	PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE 250 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	36 dB nominal, RIAA equalized MC: 56dB nominal, RIAA equalized
USB Function	A/D, – 16 bit 44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 compliant Windows 7 or above, MAC OS X or above
Power Supply Requirements	100-240V AC, 50/60 Hz
Dimensions	450.0 mm (17.72″) W x 352.0 mm (13.86″)D x 157.0 mm (6.18″)H
Weight	7.3 kg (16.1 lbs.)
Accessories Included	AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus; AT-HS6 lightweight headshell; AC adapter ; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; dust cover with hinges.