Audio-Technica AT-LP60XBT-RD Fully Automatic Wireless Belt-Drive Turntable (Red)


Free Lifetime Technical Assistance


Cut the cord, keep the vinyl. The AT-LP60XBT gives you all
the great features of the redesigned AT-LP60X fully automatic belt-drive stereo
turntable with the added convenience of Bluetooth® wireless connectivity. So
you can set up your turntable in one room and listen to it in another without
having to run a bunch of cables. 

The turntable pairs with speakers, headphones or other
wireless devices. With its CSR BT chipset, the turntable is even able to
connect to devices that support the aptX codec, which offers much-improved
sound quality over the standard SBC codec. 

Of course, the AT-LP60XBT can also be operated just like a
regular turntable with a traditional wired connection. Either way – wired or
wireless – you get outstanding audio with the ease of automatic operation
controlled by front-panel start, stop and tonearm lift buttons. 

Audio-Technica has been a leader in phono cartridge design
for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual
Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the
headshell for assured performance and ease of setup. 

The AT-LP60XBT plays both 33-1/3 and 45 RPM records and
comes with a 45 RPM adapter, a detachable dual RCA output cable (for wired
connection) and a removable hinged dust cover. The turntable is available in
black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black

  • High-fidelity
    audio with Bluetooth wireless technology
  • Connects
    wirelessly to speakers and other devices equipped with Bluetooth wireless
    technology or to wired audio systems and powered speakers via included
    dual RCA output cable
  • Compatible
    with aptX codec
  • Fully
    automatic operation with two speeds: 33-1/3 and 45 RPM
  • Anti-resonance,
    die-cast aluminum platter
  • Redesigned
    tonearm base and headshell for improved tracking and reduced resonance
  • Integral
    Dual Moving Magnet™ phono cartridge with replaceable diamond stylus
  • AC
    adapter handles AC/DC conversion outside of the chassis, reducing noise in
    the signal chain
  • Built-in
    switchable phono pre-amplifier for phono- or line-level output
  • Includes:
    detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM
    adapter, and removable hinged dust cover
  • Available
    in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black


Belt drive turntable, fully automatic


DC servo-controlled


33-1/3 RPM, 45 RPM

Turntable Platter


Wow and Flutter

Less than 0.25% (WTD) @ 3 kHz

Signal-to-Noise Ratio

>50 dB (DIN-B)

Output Level

Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain

36 dB nominal, RIAA equalized

Power Supply Requirements

100 to 240V, 50/60 Hz,0.6 A Max.

Power Consumption

1.5 W


359.5 mm (14.15″) W x 97.5 mm (3.84″) H x 373.3
mm (14.70″) D


2.6 kg (5.73 lbs.)

Accessories Included

Dust cover, felt mat, platter (with drive belt), 45 RPM
adapter, RCA audio cable (approx. 1.2 m (3.9′)), AC adapter (approx. 1.5 m

AC adapter: 12 V, 2 A
Replacement Stylus: ATN3600L
Communication System: Bluetooth Version 5.0
Maximum Communication Range: Line of sight – approx. 10 m
Compatible Bluetooth Profile: A2DP
Support Codec: SBC, Qualcomm aptX

Additional information

Weight 0.00000000 lbs


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.