Description
The AT-LP60XHP turntable and headphones combination lets you
enjoy your 33-1/3 and 45 RPM records with no additional equipment required.
Based on the AT-LP60X fully automatic belt-drive turntable, the AT-LP60XHP adds
an integrated headphone amplifier with a 3.5 mm (1/8″) headphone jack and
volume control on the front panel, so all you have to do is plug in the
included ATH-250AV over-ear headphones (or other headphones of your choice) and
start the records spinning.
Of course, the turntable can also be connected to your
stereo, powered speakers, computer or other components and used as a standard
turntable. The detachable RCA output cable (3.5 mm male to dual RCA male) and
built-in switchable phono preamp allow the turntable be connected to components
with and without a dedicated phono input. Like the AT-LP60X, the AT-LP60XHP features
a redesigned tonearm base and headshell to improve tracking and reduce
resonance. Noise is further reduced by the inclusion of an AC adapter that
moves the AC/DC conversion outside of the chassis where its impact on the
signal chain is limited.
Audio-Technica has been a leader in phono cartridge design
for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual
Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the
headshell for assured performance and ease of setup.
The ATH-250AV headphones are equipped with 40 mm drivers for
clear mid- and low-frequency reproduction. The lightweight construction and
comfortable, isolating earpads allow you to listen for as long as you like, and
the 3.5 m (11.5′) cable gives you plenty of flexibility.
The turntable comes with a 45 RPM adapter and a removable
hinged dust cover.
- Experience
the high-fidelity audio of vinyl
- Fully
automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Integrated
headphone amplifier with front-panel 3.5 mm (1/8″) headphone jack and
volume control
- ATH-250AV
over-ear headphones with 40 mm drivers, 3.5 m (11.5′) cable and 3.5 mm
(1/8″) stereo mini-plug
- Anti-resonance,
die-cast aluminum platter
- Redesigned
tonearm base and headshell for improved tracking and reduced resonance
- Integral
Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
- AC
adapter handles AC/DC conversion outside of the chassis, reducing noise in
the signal chain
- Built-in
switchable phono pre-amplifier for phono- or line-level output
- Includes:
ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA
male), 45 RPM adapter, and removable hinged dust cover
the high-fidelity audio of vinyl
automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
headphone amplifier with front-panel 3.5 mm (1/8″) headphone jack and
volume control
over-ear headphones with 40 mm drivers, 3.5 m (11.5′) cable and 3.5 mm
(1/8″) stereo mini-plug
die-cast aluminum platter
tonearm base and headshell for improved tracking and reduced resonance
Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
adapter handles AC/DC conversion outside of the chassis, reducing noise in
the signal chain
switchable phono pre-amplifier for phono- or line-level output
ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA
male), 45 RPM adapter, and removable hinged dust cover
Type |
Belt drive turntable, fully automatic |
Motor |
DC servo-controlled |
Speeds |
33-1/3 RPM, 45 RPM |
Turntable Platter |
Aluminum |
Wow and Flutter |
Less than 0.25% (WTD) @ 3 kHz (JIS) |
Signal-to-Noise Ratio |
>50 dB (DIN-B) |
Output Level |
Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
Power Supply Requirements |
120V AC, 60 Hz, 3W |
Dimensions |
359.5 mm (14.15″) W x 97.5 mm (3.84″) H x 373.3 |
Weight |
1,82 W |
Accessories Included |
3.5 mm (1/8″) mini-plug (male) to dual RCA (male) |
Reviews
There are no reviews yet.