Audio-Technica AT-LPW30TK Fully Manual Belt-Drive Turntable

$329.00

Free Lifetime Technical Assistance
SKU: AT-LPW30TK

Description

The AT-LPW30TK is a fully manual, belt-drive turntable
designed to give you optimal high-fidelity audio reproduction from vinyl. The
two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing
anti-resonance MDF (medium density fiberboard) plinth with simulated teak
veneer to limit low-frequency acoustical feedback. 

The turntable includes a straight aluminum tonearm with
adjustable tracking force and an AT-HS4 universal ½”-mount headshell with
an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a
leader in phono cartridge design for more than 50 years, and that expertise
shows in the versatile, high-performance AT-VM95C cartridge, which comes with a
0.6 mil conical stylus, but is also compatible with any VM95 Series replacement
stylus, offering a wide choice of options for every budget and
application. 

The AT-LPW30TK is equipped with a built-in selectable phono
preamp and a detachable dual RCA output cable to enable direct connection to
components with or without a dedicated phono input.

  • Fully
    manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Fully
    manual operation
  • Adjustable
    dynamic anti-skate control
  • Professional
    anti-resonance, die-cast aluminum platter with rubber mat
  • AT-HS4
    universal ½”-mount headshell and AT-VM95C Dual Moving Magnet phono
    cartridge with 0.6 mil conical stylus
  • AT-VM95C
    cartridge is compatible with any VM95 Series replacement stylus, offering
    a wide choice of options for every budget and application
  • Straight
    tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance
    MDF (medium density fiberboard) plinth with teak simulated wood veneer
  • Built-in
    switchable phono pre-amplifier for phono or line-level output
  • AC
    adapter handles AC/DC conversion outside of the chassis, reducing noise in
    the signal chain
  • Includes
    dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber
    mat, and removable hinged dust cover

Type

Belt-drive manual turntable

Motor

DC servo

Drive Method

Belt drive

Speeds

33-1/3 RPM, 45 RPM

Turntable Platter

Die-cast aluminum

Wow and Flutter

< 0.15% WRMS (33 RPM) at 3 kHz

Signal-to-Noise Ratio

>60dB

Output Level

Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec 
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain

35 dB nominal, RIAA equalized

Power Supply Requirements

100-240V AC, 50/60 Hz, 0.5 A Max.

Power Consumption

110 V 60 Hz 
Working: 1.1 W 
Motor off: 1.0 W 
Power off: 0.1 W 

Dimensions

420.0 mm (16.53″) W x 340.0 mm (13.38″) D x
116.9 mm (4.6″) H

Weight

3.90 kg (8.60 lbs.) without dust cover

Accessories Included

Dust cover, Platter, Turntable mat, Drive belt,
Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter,
RCA audio cable (approx.. 1.0 m (3.3’)), AC adapter (approx. 1.5 m (4.9’))
(AD-SA1205WE), Dust cover hinges

Tonearm type: Static balanced straight carbon tonearm 
Effective arm length: 223.6 mm 
Overhang: 18.6 mm 
Tracking error angle: <2 degrees 
Applicable cartridge weight: 12-17 g 
Stylus pressure adjustment range: 0-3 g 
AC adapter: 12 V, 0.5 A 
Replacement Stylus: AT-VMN95C

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.