Sale!

Audio-Technica AT-MONO3/SP High-Output MC 78-RPM Shellac-Record Cartridge

PRE-OWNED

$149.99

SKU: AT-MONO3/SP Used

Description

Audio-Technica AT-MONO3/SP High-Output MC 78-RPM
Shellac-Record Cartridge


PREOWNED – FULLY TESTED – INCLUDES
ORIGINAL STYLUS GUARD, SCREWS – MAYBE 5 HOURS OF USE

 

The AT-MONO3/SP is a high-output (1.2 mV) moving coil
cartridge designed specifically for use with 78 RPM mono shellac records.* Due
to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous
Casting) voice coils, the AT-MONO3/SP cartridge only generates electrical
signal with horizontal movement, yet it also has appropriate compliance in the
vertical direction to keep groove wear to a minimum. The voice coils are wired
in series, resulting in one mono signal that is transmitted to the cartridge’s
white-blue terminals and red-green terminals in order to feed both inputs of a
stereo phono preamp. 

The cartridge’s low-mass 2.5 mil conical stylus is mounted
on an aluminum cantilever for excellent tracking of the wider 78 RPM shellac
grooves. The cartridge features a strong, rigid body of die-cast aluminum alloy
and synthetic resin to eliminate unnecessary vibrations. 

* This cartridge with 2.5 mil conical stylus is not
compatible with microgroove 33-1/3 and 45 RPM vinyl records. It is designed to
play 78 RPM SP (standard play) shellac records.

  • Dual
    moving coil cartridge designed specifically for use with 78 RPM shellac
    records*
  • Aluminum
    cantilever with 2.5 mil conical stylus
  • Strong,
    rigid body construction of die-cast aluminum alloy and synthetic resin
  • PCOCC
    (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
  • Compatible
    with stereo playback systems

Frequency Response

20-15,000 Hz

Vertical Tracking Angle

23°

Vertical Tracking Force

3.0-7.0 g (5.0 g standard)

Recommended Load Impedance

400-47,000 ohms*

Coil Impedance

40 ohms (1 kHz)

DC Resistance

40 ohms

Coil Inductance

190 µH (1 kHz)

Output

1.2 mV (at 1 kHz, 12 cm/sec)

Stylus Shape

2.5 mil conical

Stylus Type

Bonded round shank

Cantilever

Aluminum pipe

Static Compliance

10 x 10-6 cm/dyne

Dynamic Compliance

3.5 x 10-6 cm/dyne (100 Hz)

Mount

Half-inch

Weight

6.8 g (0.24 oz)

Dimensions

16.0 mm (0.63″) H × 16.6 mm (0.65″) W × 26.5 mm
(1.04″) D

Accessories Included

Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge
installation screws (13 mm × 2, 20 mm × 2); plastic protector; brush; PCOCC
lead wire set

Note: Stylus assembly is not field-replaceable. 

* When connected to the MC input of a
transformer-less phono pre-amp, choose a lower gain position due to the high
output voltage (1.2 mV).

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.