Audio-Technica AT-VM95E Dual Moving Magnet Cartridge

Description

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical
stylus fits half-inch mount turntables. The cartridge’s special coil design
delivers a powerful output level of 4.0 mV. It also offers excellent channel
separation and low distortion for outstanding tonal quality. The durable,
low-resonance housing includes threaded inserts that enable the cartridge to be
mounted to the headshell with just two screws – no nuts required. And since all
VM95 Series share the same body, the stylus can be replaced with any of the six
interchangeable AT-VMN95 replacement styli.

• VM95
  Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus

• Aluminum
  cantilever

• Specially
  wound coils increase output voltage

• Durable
  low-resonance polymer housing

• Threaded
  inserts in cartridge body enable cartridge to be mounted to headshell with
  just two screws – no nuts required

• Compatible
  with any AT-VMN95 replacement stylus

Frequency Response	20-22,000 Hz
Channel Separation	20 (dB at 1 kHz)
Vertical Tracking Angle	23°
Vertical Tracking Force	1.8-2.2 g (2.0 g standard)
Stylus Construction	Bonded round shank
Recommended Load Impedance	47,000 ohms
Coil Impedance	3.3 k ohms (1 kHz)
DC Resistance	485 ohms
Coil Inductance	550 mH (1 kHz)
Load Capacitance	100 to 200 pF
Output	4.0 mV (1 kHz, 5 cm/sec.)
Channel Balance	2.0 dB (1 kHz)
Stylus Shape	0.3 x 0.7 mil elliptical
Cantilever	Aluminum pipe
Mount	Half-inch
Weight	6.1 g (0.22 oz)
Dimensions	17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D
Replacement Stylus	AT-VMN95E
Accessories Included	Two 11 mm installation screws, two 8 mm installation screws, two washers