Audio-Technica AT33MONO Dual Moving Coil MC Mono Cartridge

Save up to 30% with many A.T. MC cartridges in trade !

$299.00

Free Lifetime Technical Assistance
SKU: AT33MONO

Description

The AT33MONO is designed specifically for use with mono
vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper
by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates
electrical signal with horizontal movement, yet it also has appropriate
compliance in the vertical direction, making it safe for use with stereo
records. The cartridge’s 0.65 mil conical stylus is mounted on a hard duralumin
cantilever for excellent sound reproduction and dependable performance. Because
the AT33MONO does not easily pick up unnecessary strain components from
distorted or scratched records, it produces mono audio of a much higher quality
than that generated by a stereo cartridge. The cartridge features a strong,
rigid body and incorporates Hanenite rubber in the interior and cantilever
fulcrum support to eliminate unnecessary vibrations. 

  • Dual
    moving coil cartridge designed specifically for use with mono vinyl
    records.*
  • 0.65
    mil conical stylus is mounted on a hard duralumin cantilever
  • Strong,
    rigid body construction
  • Hanenite
    anti-vibration, high-damping rubber in the housing interior and cantilever
    fulcrum support eliminates unnecessary vibrations
  • PCOCC
    (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
  • High-quality
    brass fastening screw
  • Compatible
    with stereo playback systems

* This cartridge with 0.6 mil conical stylus is not
compatible with SP (standard play) shellac records. It is designed to play
microgroove 33-1/3 and 45 RPM vinyl records.

 

Frequency Response

20-20,000 Hz

Vertical Tracking Angle

23°

Vertical Tracking Force

2.3-2.7 g (2.5 g standard)

Recommended Load Impedance

More than 100 ohms (when head amplifier is connected)

Coil Impedance

10 ohms (1 kHz)

DC Resistance

10 ohms

Coil Inductance

28 µH (1 kHz)

Output

0.35 mV (at 1 kHz, 5 cm/sec)

Stylus Shape

0.65 mil conical

Stylus Type

Nude square shank

Cantilever

Duralumin pipe

Static Compliance

20 x 10-6 cm/dyne

Dynamic Compliance

6 x 10-6 cm/dyne (100 Hz)

Mount

Half-inch

Weight

6.9 g (0.24 oz)

Dimensions

16.0 mm (0.63″) H × 16.6 mm (0.65″) W × 26.5 mm
(1.04″) D

Accessories Included

Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge
installation screws (13 mm × 2, 19 mm × 2); plastic protector; brush; PCOCC
lead wire set

Note: Moving coil cartridges require receivers
or preamps with compatible inputs; their stylus assemblies are not
field-replaceable.

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.