Sale!

Audio-Technica AT33PTG/2 Dual Moving Coil MC Cartridge

OPEN-BOX

Original price was: $599.00.Current price is: $499.99.

499.99
SKU: AT33PTG/2 Open-Box

Description

The AT33PTG/II dual moving coil cartridge features a
Microlinear stylus that, with its small curvature radius, delivers
low-distortion, high-range performance, even when playing the inner
circumference of a record. The Microlinear stylus, which has an average life
span of around 1,000 hours, is mounted on a nude tapered boron cantilever with
a double damper for reduced weight and better audio quality. 

The cartridge’s two coils provide excellent channel
separation and are affixed within a strong, lightweight mold made of hard resin
to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and
a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure
Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

  • Moving
    coil cartridge with Microlinear stylus delivers exquisite, full-range
    audio reproduction
  • Advanced
    tapered boron cantilever and reduced coil weight improve the audio
    quality, particularly in the higher frequencies
  • Neodymium
    magnet and permendur yoke dramatically enhance the magnetic energy
  • PCOCC
    (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
  • High-separation,
    wide-response dual moving coil
  • Strong,
    rigid housing limits unnecessary vibration
  • Precision-cast
    hard aluminum alloy body enhances rigidity and the signal-to-noise ratio

Frequency Response

15-50,000 Hz

Channel Separation

30 dB (1 kHz)

Vertical Tracking Angle

23°

Vertical Tracking Force

1.8-2.2 g (2.0 g standard)

Recommended Load Impedance

More than 100 ohms (when head amplifier is connected)

Coil Impedance

10 ohms (1 kHz)

DC Resistance

10 ohms

Coil Inductance

22 µH (1 kHz)

Output

0.3 mV (at 1 kHz, 5 cm/sec)

Channel Balance

0.5 dB (1 kHz)

Stylus Shape

Microlinear

Stylus Type

Nude square shank

Stylus Curvature Radius

2.2 x 0.12 mil

Cantilever

Gold-plated nude tapered boron

Static Compliance

40 x 10-6 cm/dyne

Dynamic Compliance

10 x 10-6 cm/dyne (100 Hz)

Mount

Half-inch

Weight

6.9 g (0.24 oz)

Dimensions

16.0 mm (0.63″) H × 16.6 mm (0.65″) W × 26.5 mm
(1.04″) D

Accessories Included

Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge
installation screws (13 mm × 2, 19 mm × 2); plastic protector; brush; PCOCC
lead wire set

Note: Moving coil cartridges require receivers
or preamps with compatible inputs; their stylus assemblies are not
field-replaceable. 

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.