Goldring E3 Phono Cartridge Body Only

Description

Goldring E3 Phono Cartridge Body Only. Brand new

Includes mounting hardware and manual

The Goldring philosophy is to promote the accurate
reproduction of the original recording, maintaining the creative nuances,
musicality and rhythm the artist intended you to hear. The E Series is designed
to capture this experience when used with all medium to high mass tonearms
found on the majority of budget to medium priced turntables. This is achieved
through the use of our Magnetic Duplex Technology and Goldring Expert
Adjustment.

The E3 cartridge, the highest in the range features the same
aluminium cantilever as the E2, but benefits from a superior bonded,
super-elliptical (0.3 x 0.7 mil) stylus. This gives it superior high frequency
groove detail retrieval ability over ordinary elliptical (0.4 x 0.7 mil) or
spherical (0.6 mil) styli due to its smaller front to back radius. Its main
effect is the reduction of sibilance, especially in high level vocal recordings

Features and Benefits

Magnetic Duplex Technology™

All cartridges in the range feature Magnetic Duplex
Technology™-a ‘dual magnet’ generator assembly which more accurately traces the
record groove providing better stereo separation and a more involving and
musical sound stage.

Expert Adjustment

The E-series cartridges have been designed to allow
micro-adjustments to be made during production using a special adjustment
screw. This means the cartridge can be safely installed in a typical turntable
because the angle that the stylus makes with the record surface has been
pre-set. The result is an optimised channel balance with zero degrees of
horizontal tracking adjustment required. This ensures a consistent and
reassuring performance for the life of the product.

Stylus/Cantilever

Featuring spherical styli with a choice of cantilevers, the
E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete
cartridge.

The E3 model with its re­fined super elliptical stylus is a
worthwhile upgrade for those wishing to squeeze even more information and
detail from the record groove.

Model Variations
Colour	Violet
Cantilever	Aluminium
Stylus profile	Elliptical
Stylus radius	0.3 x 0.7 mil
Transducer Characteristics
Frequency range	20 Hz – 20 kHz
Channel balance	1.5 dB at 1 kHz
Channel separation	>20 dB at 1 kHz
Sensitivity	3.5 mV (1 kHz @ 5 cm/sec)
Static compliance	20 mm/N
Vertical tracking angle	20°
Electrical Characteristics
Load resistance	47 kOhm
Load capacitance	100 – 200 pF
Internal inductance	400 mH
Internal resistance	410 Ohm
Mechanical Characteristics
Cartridge mass	6.9 g
Fixing centres	12.7 mm (0.5 in)
Playing weight	1.5 g – 2.5 g (2.0 g recommended)