IsoAcoustics OREA Bronze Vibration Isolator for Audio Components (Each)

Description

OREA Series: provides extraordinary levels of
isolation for high fidelity audio components and turntables.

IsoAcoustics ONLINE CALCULATOR Link: Find the right solution for your speakers and equipment

2”
x 1.1” (50x29mm)

Weight Cap: 8lbs (3.6Kg) each

Bronze: Eliminates parasitic vibrations, and
providing greater sound clarity and focus. The Bronze are ideal for lighter
components including Amplifiers, DAC’s, CD Players, Speakers, and Turntables.
Made of machined stainless steel, the Bronze have a low-profile design to
minimize any increase in height.

Each Bronze will hold up to 8lbs (3.6kg) and have a coloured
ring on the bottom isolator that denotes the model and weight capacity. The
OREA series are packaged individually to allow greater flexibility when determining
the number of units to use. We recommend a minimum of 3 units under each
component, depending on weight.

The upper flange of the OREA’s are designed to provide a
suction cup like effect and adhere to the underside of the component, while the
lower flange adheres to the supporting surface. All the energy is managed
within the core of the OREA’s, which are tuned to work within specific weight
ranges. This results in greater sound clarity and a more open soundstage
providing authentic, three-dimensional sound.

The existing feet on an audio component may connect well and
fit nicely around the perimeter of the Bronze. Alternatively, you may get
better performance by either removing the feet entirely or placing the Bronze
around the existing feet to have them connect directly to the chassis or base
of the component.

Weight Capacity

The weight capacity for a single OREA Bronze isolator is 8 pounds
(3.6 KG). The OREA’s are designed to be used in multiples to match the weight
of the component or speaker. The total weight capacity is calculated as
follows:

Total Weight Capacity = [Weight cap. per isolator] x [Qty of
Isolators]

The total weight capacity for the OREA Bronze is summarized
in the table below:

It is common to use 3 or 4 OREA isolators for each component
or speaker, but keep in mind that it is most important to stay within the
weight capacity of the OREA isolator.

The weight distribution of the component can
also be taken into account. If for example the component is heaviest at the
back, then it is common to use 3 isolators with 2 positioned at the back
corners and 1 positioned front/center.