Klipsch RF-7 III Floorstanding Speakers with RC-64 III Center Speaker (Walnut)

Description

PACKAGE INCLUDES A PAIR OF RF-7 III FLOORSTANDING
SPEAKERS AND 1 RC-64 III CENTER CHANNEL SPEAKER IN WALNUT FINISH

Featuring an all-new titanium compression driver, 90×90
compressed molded-rubber Tractrix horn, redesigned bifurcated cabinet, cast
basket Cerametallic woofers and finished in a premium, furniture-grade wood
veneer – the RF-7 III floorstanding speaker champions our
legendary, high-performance Klipsch sound. 

Features:

• All-New
  1 3/4″ Titanium Compression Driver

• 90×90
  Compressed Molded-Rubber Tractrix Horn

• Redesigned
  Bifurcated Cabinet

• Dual
  Tractrix Ports

• Dual
  10″ Cast Basket Cerametallic Woofers

• Premium
  Furniture-Grade Wood Veneers

• Assembled
  in Hope, AR

90° X 90° TRACTRIX® HORN

The redesigned Tractrix Horn utilizes a circular horn throat
paired to a square horn mouth to further improve high-frequency response and
extension, while enhancing imaging and dynamics. The compressed molded rubber
construction adds high frequency damping to reduce harshness and improve
detail. This creates the cleanest, most natural sound possible.

ALL-NEW DRIVING FORCE

1 3/4″ TITANIUM DIAPHRAGM COMPRESSION DRIVER

The compression driver features a new phase plug design to
improve phase coherency at the throat of the horn, resulting in improved sound
pressure linearity at high frequencies.

SPUN COPPER CERAMETALLIC WOOFERS™

Cerametallic woofers represent the pinnacle of Klipsch
driver design, maintaining exceptional rigidity, and lightweight construction,
for minimal cone breakup and distortion. When paired with the Tractrix
horn-loaded compression driver, it provides speaker efficiency highest in its
class.

NEW DUAL CHAMBER + TRACTRIX® PORT

The RF-7 III new bifurcated enclosure allows each 10” driver
and port to work independently from the other. This improves the linearity of
both drive systems, and minimizes standing wave problems inside the cabinet
that can cause frequency anomalies in the sensitive midrange frequencies.

Utilizing Tractrix geometry, the new RF-7 III ports allow
for the most efficient air transfer from the cabinet — for the cleanest, most
powerful low frequency response on the market.

CAST FRAME WOOFER DESIGN

Each 10” woofer feature a heavy-duty cast aluminum frame for
resonant-free operation. In addition, each woofer incorporates a dual
shorting-ring magnet structure design to eliminate modulation of the magnetic
flux resulting in improved linearity of cone movement.

FURNITURE GRADE WOOD VENEERS

The RF-7 III floorstanding speaker enclosures all
utilize furniture grade wood veneers, and are available in Black Ash, Cherry
& Walnut.

DESIGNED & ASSEMBLED IN AMERICA

These speakers are built to rigid Klipsch standards — the
toughest in the industry. Remember great sound? We do, too. These speakers
are Designed & Assembled in the USA, by proud craftsmen in Hope,
Arkansas. Just like Paul W. Klipsch (PWK) intended.

FREQUENCY RESPONSE
32–25kHz +/– 3dB
POWER HANDLING
250W / 1000W peak
SENSITIVITY
100 dB @ 2.83V /
1M
NOMINAL IMPEDANCE
8 ohms compatible
HIGH FREQUENCY HORN        8.5”
square 90˚ x 90˚ Tractrix® Horn
HIGH FREQUENCY DRIVERS  1.75” (4.45cm) titanium
diaphragm compression driver
CROSSOVER FREQUENCY     1,300 Hz
LOW FREQUENCY DRIVERS   Two 10” (25.4cm)
Cerametallic cone woofers
INPUTS

Dual binding posts / bi-wire / bi-amp

ENCLOSURE TYPE
 Dual chambered, bass-reflex — via dual
rear-firing Tractrix ports
HEIGHT

49” (124.5cm) including plinth

WIDTH

13.875” (35.2cm) including plinth

DEPTH

 

 17.875” (45.4cm) including plinth
WEIGHT

 

 97 Ibs (44.1kg)

Get the legendary, high-performance Klipsch sound with
the RC-64 III center channel speaker. Featuring an all-new titanium compression
driver, 90×90 compressed molded-rubber Tractrix horn, redesigned bifurcated
cabinet, cast basket Cerametallic woofers and finished in a premium,
furniture-grade wood veneer – the RC-64 III center channel speaker
delivers real-to-life, front row, cinema-quality acoustics. 

Features:

• All-New
  1 3/4″ Titanium Compression Driver

• 90×90
  Compressed Molded-Rubber Tractrix Horn

• 2
  1/2 Way Network Crossover Design

• Quad
  6.5″ Cast Basket Cerametallic Woofers

• Premium
  Furniture-Grade Wood Veneers

• Assembled
  in Hope, AR

90° X 90° TRACTRIX® HORN

The redesigned Tractrix horn utilizes a circular horn throat
paired to a square horn mouth to further improve high-frequency response and
extension, while enhancing imaging and dynamics. The compressed molded rubber
construction adds high frequency damping to reduce harshness and improve
detail. This creates the cleanest, most natural sound possible.

NEW 1 3/4 TITANIUM DIAPHRAGM COMPRESSION DRIVER

The compression driver features a new phase plug design to
improve phase coherency at the throat of the horn, resulting in improved sound
pressure linearity at high frequencies.

SPUN COPPER CERAMETALLIC WOOFERS

Cerametallic woofers represent the pinnacle of Klipsch
driver design, maintaining exceptional rigidity, and lightweight construction,
for minimal cone breakup and distortion. When paired with the Tractrix
horn-loaded compression driver, it provides speaker efficiency highest in its
class. 

CAST FRAME WOOFER DESIGN

Each 6.5” woofer feature a heavy-duty cast aluminum frame
for resonant-free operation.

2 1/2 WAY NETWORK CROSSOVER DESIGN

The sophisticated design of the RC-64 III network attenuates
the outer woofers output at higher frequencies to minimize horizontal
interference off-axis to the loudspeaker. This maintains a wide and even sound
distribution — ensuring each listener hears the center channel information
exactly as intended.

FURNITURE GRADE WOOD VENEERS

RC-64 III enclosures all utilize furniture grade wood
veneers, and are available in Black Ash, Cherry & Walnut.

DESIGNED & ASSEMBLED IN AMERICA

These speakers are built to rigid Klipsch standards — the
toughest in the industry. Remember great sound? We do, too. These speakers
are Designed & Assembled in the USA, by proud craftsmen in Hope,
Arkansas. Just like Paul W. Klipsch (PWK) intended.

FREQUENCY RESPONSE
57–24kHz +/– 3dB
POWER HANDLING
200W / 800W peak
SENSITIVITY*
99 dB @ 2.83V / 1M
NOMINAL IMPEDANCE
8 ohms compatible
HIGH FREQUENCY HORN       6.25”
square 90˚ x 90˚ Tractrix® Horn
HIGH FREQUENCY DRIVERS  1.75” (4.45cm) titanium
diaphragm compression driver
CROSSOVER FREQUENCY     1,000 Hz &
1,400 Hz
LOW FREQUENCY DRIVERS   Quad 6.5” (16.5cm)
Cerametallic cone woofers
INPUTS

Dual binding posts / bi-wire / bi-amp

ENCLOSURE TYPE
Sealed
HEIGHT

 

 8” (20.3cm)
WIDTH

35.8” (91cm)

DEPTH

 

 15” (38.1cm)
WEIGHT

55 Ibs (25kg)