Lyngdorf BW-2 Reference High Bandwidth Subwoofer (Matte Black)

Description

PREOWNED – FULLY TESTED – COMPLETE

BW-2

THE REFERENCE HIGH
BANDWIDTH SUBWOOFER

OPTIMAL PERFORMANCE
THROUGH PEERLESS DESIGN

The active BW-2 is designed as a high bandwidth subwoofer
with the objective of reproducing music and soundtracks with full dynamics and
precision. The minimalistic – ‘form follows function’ design ensures that all
resources are focused on the best possible sound reproduction.

The frequency range of the BW-2 goes up to 800 Hz in
“bypass” mode, in contrast to traditional subwoofers, which are
typically limited to 120 Hz. In other words, this is a driver that follows the
signal with extreme precision. It therefore can actually play music and not
just the low-end rumble and explosions of an action movie.

EASY TO INTEGRATE

The BW-2 is designed with a focus on discretion. Available
in matte black or white—allowing for seamless integration in any
contemporary interior.

It can be positioned standing upright or on the side in
order to fit into the available space. This also makes it the perfect match for
any stereo or home cinema system.

REFINED CLASS D POWER

The internal amplifier is our own Class-D design based on
our more than 15 years of experience in designing audiophile Class-D
amplifiers. With an output of 400 watts it can deliver ample power to control
the driver even at extreme levels.

LONG-THROW DRIVER

The custom made 10” long-throw woofer driver features a
massive magnet and voice coil to control the frequency response in the compact
cabinet. This results in an extremely fast response and high efficiency.

To ensure perfect piston movement of the cone, it is
manufactured in deep anodized aluminium. The open basket design allows
ventilation below the spider – which, together with the vented pole piece,
prevents over and under pressure from causing mechanical losses when the cone
is moving.

The driver is positioned off-centre for the driver to be
situated as close to the floor and wall as possible. The compact design not
only reduces cabinet resonances but it also allows for optimal coupling to the
room.

MORE THAN A SUBWOOFER

The BW-2 has two input modes. If you set it to “Line in,” it
can be used with conventional amplifiers and processors and has a frequency
range from 25 to 200 Hz. As with regular subwoofers, you have control over
level, frequency range, and phase adjustment.

If you have a Lyngdorf Audio amplifier, you can bypass the
internal filters. Now the frequency range goes up to 800 Hz, and you can use
the BW-2 as a boundary woofer to lift the performance of your system to a new
level.

EVEN BETTER TOGETHER

Combining the BW-2 with our MH-2 satellite
speakers—along with the TDAI-2170 with built-in RoomPerfect and
digital crossovers—will produce a full range system that simply outperforms
anything in or above its price range.

The logistics are incredibly simple. Just hook up the MH-2´s
and one or two BW-2´s to the TDAI-2170, switch the BW-2 to the “bypass”
function, and select the preconfigured speaker setup in the TDAI-2170´s setup
menu. Finish it off by running RoomPerfect™. Then sit back and enjoy.