Sale!

MartinLogan Motion 60XTi Floorstanding Speaker (Red Walnut)

Original price was: $1,874.99.Current price is: $1,300.00.

1300
Free Lifetime Technical Assistance
SKU: Motion 60XTi Red Walnut

Description

A powerful floorstanding speaker featuring a Folded Motion®
XT tweeter, 6.5-inch aluminum cone midrange driver, and dual 8-inch aluminum
cone woofers with rear-firing bass ports. Available in three stylish finishes:
gloss black, matte white, and red walnut.

Motion 60XTi Floorstanding Speakers

This is the flagship of the Motion Series. It’s a powerful
floorstanding loudspeaker featuring a Folded Motion® XT tweeter,
6.5-inch aluminum cone midrange driver, dual 8-inch aluminum cone woofers with
rear-firing bass ports, and a proprietary Vojtko crossover network. XT stands
for extreme: lifelike details from the lightning-fast Folded Motion XT tweeter,
open and authentic midrange performance, coupled with deep, musical bass
response. These classic performance technologies have been enhanced by the slightest
of modifications, including the drive-stabilizing dust cap design, stiffened
motor suspension, and low-mounted woofers to reduce an acoustically harmful
phenomenon known as floor bounce. The speaker’s enclosure sports increased
internal bracing, a reinforced baffle, and a fabric grille. Available in three
stylish finishes: gloss black, matte white, and red walnut.

Engineering, Without Compromises

What makes the Motion Series sound so amazing? MartinLogan’s
dedicated in-house engineering and design team started by utilizing and
refining the most advanced, compact technologies and combining them with
innovative engineering and time-honored cabinet construction techniques. The
result is an emotionally engaging sound that rivals (and most times trounces)
traditional loudspeakers of similar size and price. Our ‘no compromise’
philosophy gives Motion Series a unique sound you won’t find anywhere else.

Sound Inspired by Electrostatic Speakers

The success of the Motion Series is directly attributed to
its close relation to MartinLogan’s legendary ultra-high-end electrostatic
loudspeakers. The desire to transmute that level of performance into a more
traditional loudspeaker at a more affordable price drove the initial design
imperatives that created the Motion Series.

Folded Motion® XT Tweeters

MartinLogan’s signature Folded Motion tweeter utilizes an
extremely low mass diaphragm that “squeezes” air, thus demanding
significantly less excursion than the typical 1-inch dome tweeter. Its folded
design allows for a much larger surface area (compared to that of a regular
1-inch dome tweeter), controlled dispersion characteristics, and vanishingly
low distortion. It’s a miracle of audio engineering that’s able to deliver much
of the high-frequency detail and speed of a large, dynamic electrostatic panel
in a small space. Folded Motion XT tweeters, advanced thin-film transducer
technology even further, with a 40% larger radiating surface and 80×30-degree
controlled dispersion. This tweak increases audible bandwidth without
sacrificing details and minimizes distortion to an unprecedented level while increasing
efficiency and the tweeter’s already lightning-fast response time. The
result—superior realism and alarming specificity is aurally astounding, and
only by MartinLogan.

Powerful Aluminum Cone Mid-Frequency and Bass Drivers

Custom built, low-distortion drivers pair high-power magnet
structures with aluminum cone diaphragms to deliver massive excursion and sound
output, preserve minute bass details, and maximize power handling capability,
all without a hint of distortion. A unique concave dust cap design reinforces
the strength and rigidity of the cone while reducing break up modes.

The use of aluminum for cones maximizes rigidity and
strength of the drivers without adding excessive weight. This, along with the
exceptional damping properties of aluminum, ensures the smooth, non-resonant
response necessary for seamless blending with high-resolution Folded Motion
tweeters. An added benefit of aluminum is its outstanding thermal conduction
capability which allows cones to serve as efficient heat sinks for voice coils.

To deliver accuracy in the critical midrange, mid-frequency
drivers feature a specially engineered “stiff” suspension. Stiffening
the suspension (the spider and surround) raises the driver’s resonant frequency
and optimizes its performance to achieve a natural roll-off and inherently
operate within an ideal range for a mid-frequency reproduction (as opposed to a
comparably sized woofer).

Low-Mounted Woofers Minimize Floor Bounce

Floorstanding Motion models utilize 2.5-way designs that
feature woofers positioned low in the cabinet and close to the floor. This
deliberate design addresses a phenomenon known as floor bounce where sound
reflected off the floor (from drivers positioned high on a cabinet), and those
aimed directly at the listener interfere with each other. Without addressing
these issues, listeners would experience bloated bass and massive increases and
decreases in sound levels throughout critical midrange frequencies. Through
careful crossover design and driver positioning, floorstanding Motion speakers
deliver a flat, balanced response through the bass and midrange regions. Such
considerations are crucial when seeking to achieve accurate reproduction of
vocals and instruments such as kick drums.

Proprietary Vojtko Crossover Networks

Premium Motion Series speakers feature proprietary Vojtko
crossover networks using polypropylene and low-DF electrolytic capacitors,
custom-wound inductors, and thermal and current protection.

Vojtko crossovers are named after MartinLogan’s chief audio
technologist, Joe Vojtko. His unique approach to crossover design is as big of
a part of the “MartinLogan Sound” as are electrostatic and Folded Motion
thin-film driver technologies. A Vojtko crossover isn’t so much a set of design
requirements as it is a philosophy. Vojtko crossovers are designed in such a
way that all drivers are kept within their optimal frequency range and balanced
with one another. The drivers themselves are as much a part of a Vojtko
crossover as are capacitors and resistors. Before the design of any crossover
begins, drivers are carefully selected or designed to operate within a very
intentional frequency range and with precise and predictable performance
parameters. Vojtko crossovers are always built from high-quality parts, and
care is taken to avoid overly complex topologies—a straightforward objective
due to the careful selection of woofers and tweeters. The final (and most critical)
aspect of a Vojtko Crossover is that final voicing is conducted in a space that
is indicative of a real-world environment. This pragmatic approach allows
MartinLogan speakers to sound their best in real-world rooms.

Modern Design Featuring Luxurious Finishes

Discreetly hidden behind fabric wrapped magnetic grilles,
Folded Motion and aluminum cone drivers are held securely in place beneath
matte black trim that masks tweeter and woofer mounting hardware for a clean,
modern aesthetic. Solid cabinets, designed to eliminate fidelity robbing
vibrations, are constructed from 18mm (0.7-inch) MDF with 31mm (1.2-inch) thick
front baffles. Motion 60XTi and 50XTi feature additional internal bracing to
further reduce cabinet resonance.

MartinLogan’s premier Motion Series speakers are available
in three luxurious finishes and matching metallic trim—gloss black with black
grilles and gunmetal grey trim, matte white with silver grilles and silver
trim, and red walnut with black grilles and champagne colored trim.

Custom 5-Way Tool-less Binding Posts

Premium gold-plated 5-way tool-less binding posts assure a
stable connection while accommodating a wide range of connections.

Two sets of binding posts accommodate bi-wire connections to
increase signal carrying conductors and allow each portion of the crossover to
be directly coupled to the amplifier.

Specifications

Specifications are subject to change without notice

Frequency Response

35–25,000 Hz ±3dB

Recommended Amplifier Power

20—400 watts per channel

Horizontal Dispersion

80°

Vertical Dispersion

30°

Sensitivity

94 dB/2.83 volts/meter

Impedance

4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers.

Crossover Frequency

400 & 2,200 Hz

High Frequency Transducer

1.25″ × 2.4″ (3.2cm × 6.1cm) Folded Motion XT
Transducer with 4.5″ x 2.75″ (11.4cm × 7cm) diaphragm

Mid Frequency Transducer

6.5” (16.5cm) aluminum cone with cast polymer basket.
Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes.

Low Frequency Transducer

Two 8” (20.3cm) aluminum cone with cast aluminum basket.
Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce
cone break-up modes.

Components

Custom air core coil and low DCR steel laminate inductors.
Polypropylene film capacitors in series and low DF electrolytic capacitors in
parallel. Tweeter thermal/current protection.

Inputs

Custom 5-way bi-wire tool-less binding posts

Weight

66 lbs. (30 kg)

Dimensions

48″ x 11.4″ x 14.4 “

(121.8cm x 29cm x 36.6cm)

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.