MartinLogan XTW5-LCR In-Wall LCR Speaker (EACH)

Description

Motion XTW5-LCR

In-Wall Speaker

The smaller of the two “LCR” models in the Motion XT CI
series, the XTW5-LCR functions equally well as a center, front or surround
channel, or anywhere higher performance and/or a more rectangular shape is
desired. A perfect complement for a flat panel TV or projector screen; the
XTW5-LCR allows for flexible placement and incredible performance. Its FMT XT
tweeter can be rotated to help create the sound dispersion that works best for
your space.

The MartinLogan Motion XT CI series takes performance to the
next level over Motion CI. The Folded Motion XT tweeter gives each model in the
Motion XT series even more of the clarity, output and efficiency that the
standard size FMT is famous for. With Motion XT, we wanted to increase all
aspects of performance over the Motion series, so we didn’t just stop at the
tweeter. All Motion XT models feature woven Kevlar woofers for increased
rigidity and lightness as well as a special Nomex layer on the back side of the
woofer material which increases clarity and realism by reducing resonance and
ringing. In addition to the larger tweeter, and lighter, stronger woofers,
MartinLogan’s design and engineering team has fitted the Motion XT series with
a more substantial chassis to strengthen the speaker and provide a more
accurate sound, similar to a better cabinet on a traditional speaker. The Nomex
layer and the chassis are not something you can see after installation, but it
matters to the performance of the speaker, so it matters to us. With Motion XT
CI, the difference is in the details.

The Sound of Invisibility:

Folded Motion^® Tweeters

MartinLogan’s signature Folded Motion Tweeter utilizes an
extremely low-mass diaphragm that “squeezes” air, thus requiring
significantly less excursion than the typical 1-inch dome tweeter. Its folded
design allows for a much larger surface area (compared to that of a regular
1-inch dome tweeter), controlled dispersion characteristics, and vanishingly
low distortion. It’s a miracle of audio engineering that delivers much of the
high-frequency detail, speed and response of a large, dynamic electrostatic
panel in a small space. Folded Motion XT tweeters advance thin-film transducer
technology even further with a 40% larger radiating surface and 80×30-degree
controlled dispersion. This upgrade increases audible bandwidth without
sacrificing detail and reduces distortion to an incredibly low level while
increasing efficiency and the tweeter’s already lightning-fast response time.
The result is superior realism and alarming specificity that is aurally
astounding, and only by MartinLogan.

This thin-film transducer design packs all the accuracy and
delicacy of an electrostatic panel into a small space. Folding the dramatically
lightweight film into an accordion-like structure increases the surface area,
giving Folded Motion tweeters eight to ten times greater surface area than
typical tweeters. This ideal combination of light and large produces superior
accuracy, extended frequency bandwidth and higher output capability; all with a
faster, more efficient transient response, and virtually zero distortion. In
these characteristics, the Folded Motion Tweeter design can mimic the
performance of a large electrostatic panel in the confines of a more
traditional loudspeaker enclosure.

Woven Kevlar Cones

All Motion XT CI speakers feature very lightweight woven
Kevlar cones specifically engineered to keep pace with the lightning speed of
our highest performance Folded Motion Tweeter XT. While these high-performance
drivers offer both increased rigidity and lightness, we took an extra step by
adding a special Nomex layer on the back side of the woofer material which
increases clarity and realism by reducing resonance and ringing. This layer is
not something you can see after installation, but it matters to the performance
of the speaker, so it matters to us.

No matter which Motion XT CI speaker you choose for your
room, rest assured they are designed to provide a consistently high level of
performance and can easily be used with other MartinLogan speakers to make
creating the perfect system for your unique listening space that much easier.

The MartinLogan Sound

MartinLogan Motion XT CI speakers sound incredible in any
room. Regardless of the environment, our speakers just sound better, more
articulate, more detailed, and more realistic. With Controlled Dispersion and
one of the most responsive tweeters in the industry, our in-wall and in-ceiling
models can compete with and often exceed the performance of traditional cabinet
speakers.

Spring-Loaded Binding Posts

With easy pre-installation access, our spring-loaded binding
posts feature a large 4.5mm wire access hole and connect via banana plug, pin,
or 12AWG bare wire.

Micro-Perforated Grilles

All MartinLogan architectural speakers feature an ultra-low
profile, paintable, micro-perforated grilles with no visible bezel for a
near-invisible integration into any wall or ceiling. A series of powerful
magnets hidden inside the speaker quickly secure grilles into place, reducing
the risk of warping or damage during installation.

Proprietary Vojtko^™ Crossover Networks

Vojtko Crossovers are named after MartinLogan’s chief audio
technologist, Joe Vojtko.

His unique approach to crossover design is just as crucial
to MartinLogan’s Truth in Sound as are our innovative electrostatic and Folded
Motion thin-film driver technologies. A Vojtko Crossover isn’t just a set of
design requirements; it’s a philosophy.

Vojtko Crossovers are hand-built from the highest quality
components and avoid overly complex topologies. This crossover has a
straightforward objective: breathtaking realism.

Hand-Selected Components

In designing each crossover topology, we take the drivers
themselves into consideration. Carefully selected drivers, engineered for
specific performance characteristics, are kept within their optimal frequency
range by the custom Vojtko Crossover.

Each crossover is handcrafted using exceptional
polypropylene and polyester capacitors, custom wound and large steel laminate
low-DCR inductors, and double thick PCBs. This precision-tuned network
preserves even the most microscopic sonic nuances while handling the full
dynamics of any source. It’s a recipe for vanishingly low distortion and
seamless driver integration.

The most critical aspect of a Vojtko Crossover design is the
final voicing, always conducted in a real-world environment. This uniquely
pragmatic approach guarantees that even the most amazing MartinLogan loudspeakers
deliver Truth in Sound in any room, including yours.

Specifications

Specifications are subject to change without notice

Frequency Response	61 – 25,000 Hz ±3dB
Tweeter Dispersion (horizontal x vertical)	80 x 30 degrees
Recommended Amplifier Power	Range 50–250 Watts
Sensitivity	92dB @2.83V/ 1 meter
Impedance	4 ohms. Compatible with 8 ohms
High Frequency Driver	FMT Transducer 1.27” x 2.4” (3.22cm x 6.09cm) Opening 4.5” x 2.75” (11.43cm x 6.98cm) Diaphragm
Crossover Frequency	2,180 Hz
Crossover Type	2 way
Driver Configuration	1 x 1.27” x 2.75” FMT, 2 x 5.25” Woofers
Woofer Specifications	Two 5.25” (13.33 cm) cast aluminum basket, black Kevlar with Nomex backer cone, Open back chamber format. Concave dust cap.
Cabinet Material	Black w/ White Paintable Grill
Connector	Push style
Components	Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors FMT thermal/current protection.
Max Power Handling	125 Watts
Weight	9.8 lbs. (4.4 kg) each
Dimensions (overall size)	7.87” x 15.79” x 3.32” (20 x 40.1 x 8.43cm)
Required Wall Opening (includes tolerance)	14.5” x 6.5” (36.8 x 16.5cm)
Projection From Wall Surface	0.12” (0.3cm)
Depth Behind Wall Surface	3.20” (8.13cm)