Description
With the addition of the PP 4 to your home system, the LPs
you cherish the most come alive in the form of expansive and rich sound.
Offering superb and measured sonic performance, NAD combines two simple
solutions – the PP 4 Digital Phono and the USB Preamplifier – into one small
device, making it easy to add phono to stereo amplifiers and AV receivers
without a phono input. The PP 4 uses a shielded USB cable and recording level
control, which reduces noise and improves the analogue-to-digital conversion
process. As part of NAD’s commitment to the environment, the PP 4 features a
more efficient “green” power supply that reduces power consumption. It also has
an Auto Power Down feature that saves energy by shutting off when not in use.
Digitize your vinyl collection
Offering superb measured and sonic performance, NAD’s two
simple solutions, the PP 4 Digital Phono/USB Preamplifier makes it easy to add
phono to many of today’s stereo amplifiers and AV receivers that have either
eliminated the phono input or included a low-quality circuit for attaching your
turntable. As part of NAD’s commitment to the environment, the PP 4 features a
more efficient “green” power supply that reduces power consumption. The PP 4
goes one step further with a USB interface, shielded USB cable and recording
level control which reduces noise and improves the analogue-to-digital
conversion process. The PP 4’s Auto Power Down feature saves energy by
automatically powering the PP 4 to OFF when not in use.
Our PP 4 Digital Phono/USB Preamplifier enables you to digitize
your treasured vinyl collections to a PC or Mac. It features inputs for both MM
(moving magnet) and MC (moving coil) types for a wide variety of phono
cartridges, and there is a line input to allow for the transfer of cassette
tapes. The PP 4 also includes VinylStudio Lite Software for ripping LPs and
burning audio CDs. The PP 4 Phono-to-USB Preamp offers a complete hardware and
software solution with exceptional flexibility to record from LP or tape.
PP 4 VinylStudio Lite
The PP 4 (or the older PP 3) comes with Mac and PC
compatible version of AlpineSoft’s VinylStudio Lite ripping software is
included with your new PP-4. With VinylStudio Lite you can:
- Rip
LPs into WAV files
- Split
Tracks
- Burn
CDs
- Record
Disks
- Look
up Song Titles
- Handle
File Management
MC
- Input
Impedance (R and C)
- 100
Ohm + 180pF
- Gain
at 1kHz
- 58dB
- Input
sensitivity (ref. 200mV output)
- 0.38mV
- Signal
to noise (A weighted, with cartridge connected)
- 78dB
- Input
overload (20Hz/1kHz/20kHz)
- 0.65/6.5/60mV
- Rated
Distortion (THD 20Hz – 20kHz)
- <0.03%
- RIAA
response accuracy
- ±0.3dB
- Infrasonic
filter
- -14dB
(5Hz)
- -3dB
(10Hz)
- Digital
output (USB)
- 16 bit
linear PCM
- Sampling
frequency
- 48kHz
- Dynamic
range
- 86dB
MM
- Input
Impedance (R and C)
- 47
kilohm + 200pF
- Gain
at 1kHz
- 35dB
- Input
sensitivity (ref. 200mV output)
- 5mV
- Signal
to noise (A weighted, with cartridge connected)
- 76dB
- Input
overload (20Hz/1kHz/20kHz)
- 10/100/900mV
- Rated
Distortion (THD 20Hz – 20kHz)
- <0.03%
- RIAA
response accuracy
- ±0.3dB
- Infrasonic
filter
- -14dB
(5Hz)
- -3dB
(10Hz)
- Digital
output (USB)
- 16 bit
linear PCM
- Sampling
Frequency
- 48kHz
- Dynamic
range
- 89dB
- Record
Level
- 0dB to
-6dB
- Gross
Dimensions excl. Power supply (W x H x D)*
- 135 x
49 x 72mm
5 5/16 x 1 15/16 x 2 7/8″**
Line In
- Input
Impedance
- 47
kilohm + 180pF
- Rated
Distortion (THD 20Hz – 20kHz)
- <0.008%
- Signal
to noise, A weighted
- -115dB
- Maximum
Input Level
- 5.3V
Line Out
- Output
Impedance
- 100
Ohm
- Maximum
Output Level
- 5.3V
Reviews
There are no reviews yet.