Description
PREOWNED – FULLY TESTED – PRICE PER PAIR IN MAHOGANY FINISH – INCLUDES ORIGINAL BOXES/PACKING, OUTRIGGERS & HARDWARE, GRILLES – ALSO INCLUDES THE NHT SA-3 SUB AMP WITH BOX, MANUAL, POWER CABLE
3.3 Description: Four-way, sealed-enclosure, loudspeaker system. Drive-units: 12″ polymer-cone woofer, 6.5″ polymer-cone midbass, 4″ polymer-cone upper midrange, 1″ fluid-damped aluminum-dome tweeter. Crossover frequencies: 100Hz (12dB/octave), 320Hz (12dB/octave), 3.5kHz (18dB/octave). Frequency response: 23Hz-26kHz ±2dB (in-room, 1m). Usable bass response: -6dB at 19Hz, in-room (-3dB at 22Hz, in-room). Sensitivity: 87dB/2.83V/1m. Nominal impedance: 6 ohms (4.3 ohms minimum, 10.5 ohms maximum, no phase angle greater than ±30 degrees). Amplifier requirements: 30-300W, 1000W peak.
Dimensions: 42″ H by 7″ W by 31″ D, Weight: 123 lbs each.
About the NHT SA-3:
Use NHT’s super-powerful, super-clean SA-3 to drive your passive subwoofer or the built-in subs in your biampable main speakers, and get ready for soul-stirring, audiophile-quality bass!
This versatile amp has plenty of power in reserve to push both of the bass drivers in a biampable stereo pair. Or use 2 SA-3s for even more impressive bass, and stereo subwoofer performance. The SA-3 is a perfect solution for biamping NHT’s VT-2.4 Home Theater Series or 2.9 Music Series towers.
Details:
- 250 watts (mono) RMS into 6 ohms at 0.03% THD
- gold-plated 5-way binding posts for subwoofer output (parallel wiring recommended for driving a pair of subs)
- continuously variable 35-150 Hz, 24 dB/octave low-pass crossover
- selectable high-pass crossover (65, 80, 100, 125, or 150 Hz) for preamp output
- 4-position selectable phase control (0°, 90°, 180°, or 270°)
- 17″W x 5-1/8″H x 14-1/2″D
Reviews
There are no reviews yet.