Sale!

Audio-Technica AT-OC9XML Dual Moving Coil Cartridge

OPEN-BOX

$464.99

SKU: AT-OC9XML Open-Box

Description

The AT-OC9XML Dual Moving Coil cartridge with Microlinear
stylus is designed to provide outstanding channel separation. The Pure Copper
by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are
aligned in a reverse V-shaped formation to exert less pressure on the stylus,
thereby minimizing distortion. Audio quality is further enhanced by a rigid
aluminum body that reduces resonance, a neodymium magnet and premium permendur
yoke that increase the magnetic energy, and the nude Microlinear stylus on a
boron cantilever that tracks the record groove with incredible accuracy, low
distortion and high-transient response. The cartridge body has been
pre-threaded, enabling it to be mounted to a headshell or integral tonearm with
just two screws – no nuts required.

  • Dual
    Moving Coil design, featuring independent coils for both left and right
    channels, provides outstanding channel separation
  • The
    coils are aligned in a reverse V-shaped formation, which exerts less
    pressure on the stylus, thereby minimizing distortion
  • The
    cartridge body is pre-threaded, enabling it to be mounted onto the
    headshell or integral tonearm with just two screws – no nuts required
  • Nude
    Microlinear stylus and boron cantilever provide lower distortion and high
    transient response
  • A
    neodymium magnet and a premium permendur yoke with high saturation flux
    density and outstanding magnetic properties further enhance the
    concentrated magnetic field of the coil gap
  • Aluminum
    body minimizes unwanted vibration for reduced resonance and superior audio
    reproduction
  • Pure
    Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to
    achieve pure signal transfer

Type

Dual
Moving Coil

Body
Material

Aluminum

Frequency
Response

20-47,000
Hz

Channel
Separation

27 dB
(1 kHz)

Vertical
Tracking Angle

20°

Vertical
Tracking Force

1.8-2.2
g (2.0 g standard)

Recommended
Load Impedance

Min.
100 ohms (when head amplifier is connected)

Coil
Impedance

12 ohms
(1 kHz)

DC
Resistance

12 ohms

Coil
Inductance

25 mH
(1 kHz)

Output

0.4 mV
(at 1 kHz, 5 cm/sec)

Channel
Balance

1.0 dB
(1 kHz)

Stylus
Shape

Microlinear

Stylus
Type

Nude
square shank

Stylus
Curvature Radius

2.2 x
0.12 mil

Cantilever

0.28 mm
diameter nude boron

Static
Compliance

20 x
10-6 cm/dyne

Dynamic
Compliance

16 x
10-6 cm/dyne (100 Hz)

Wire
Used for Coil

PCOCC

Terminal
Pins

Brass

Mount

Half-inch

Weight

7.6 g
(0.3 oz)

Dimensions

17.3 mm
(0.68″) H × 16.8 mm (0.66″) W × 25.7 mm (1.01″) D

Accessories
Included

Non-magnetic
screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10
mm x 2, 12 mm x 2); plastic protector; brush

Mounting
Feature:
 Threaded body

Note: moving coil cartridges require receivers or
preamps with compatible inputs; their stylus assemblies are not
field-replaceable.

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.