
Music Hall Hinge for MMF-1.5 Turntable Dust Covers
Music Hall Hinge for MMF-1.5 Turntable Dust CoversHinge also works with Audio Technica AT-LP120, AT-..
$14.99
Turntable |
|
Type |
3-speed, fully manual operation |
Motor |
DC servo motor |
Drive Method |
Direct drive |
Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
Turntable Platter |
Die-cast aluminum |
Starting Torque |
>1.0 kgf.cm |
Braking System |
Electronic brake |
Wow and Flutter |
<0.2% (WTD) @ 3 kHz (JIS) |
Signal-to-Noise Ratio |
>50 dB |
Output Level |
Pre-amp
“PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
|
Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
USB Function |
A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above |
Power Supply Requirements |
100 to 240 V, 50/60 Hz, 1.5A Max |
Power Consumption |
2.75 W |
Dimensions |
452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H |
Weight |
8 kg (17.6 lbs.), without dust cover |
Accessories Included |
AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light |
Tonearm Type |
Balanced S-shaped tonearm with detachable headshell |
Effective Arm Length |
230.5 mm |
Overhang |
16 mm |
Tracking Error Angle |
Less than 3 degrees |
Applicable Cartridge Weight |
3.5-8.5 g |
Anti-skating Range |
0-4 g |
Replacement Stylus |
AT-VMN95E |
Communication System |
Bluetooth Version 5.0 |
Maximum Communication Range |
Line of sight - approx. 10 m (33') |
Compatible Bluetooth Profile |
A2DP |
Support Codec |
SBC, Qualcomm® aptX™ audio |
Music Hall Hinge for MMF-1.5 Turntable Dust CoversHinge also works with Audio Technica AT-LP120, AT-..
$14.99
AT-HS10SVUniversal HeadshellThe lightweight aluminum AT-HS10SV is a universal ½"-mount headshell fo..
$48.00
AT-HS10BKUniversal HeadshellThe lightweight aluminum AT-HS10BK is a universal ½"-mount headshell fo..
$48.00
409DJ2069audio-technica genuine 409-DJ2-069 AC Power Cable for AT-LP120 and AT-LP3AC power cab..
$19.99
audio-technica Genuine OEM 100HP1632A Tonearm Lock Clamp for AT-LP120 Turntables..
$7.99
Counterweight for Audio Technica AT-PL120X and AT-LP140XP direct drive professional turntable..
$39.99
SERVICE PART #ATPT-LP120XPSUReplacement power supply for AT-LP120X turntables. The power supply inc..
$59.99
Dust cover hinge for Audio Technica AT-LP120, AT-LP60X, AT-LP3, AT-LP140 and AT-LP5 direct drive pro..
$14.99
Dust cover hinge for Dual CS429.Also works with Sony PS-HX500, Music Hall MMF-1.5, Stanton STR8-80, ..
$14.99
When we were requested to develop a headphone amplifier, for sure that had to be something specia..
$649.99 $1,199.99
Planar 8 & Neo PSUThe Planar 8 was inspired by the ultimate Rega turntable, the 'Naiad'. ..
$3,495.00