Audio-Technica AT-LPW40WN Fully Manual Belt-Drive Turntable

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM. 

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. 

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

• Motor features a speed-sensor system to maintain accurate platter rotation speed

• Fully manual operation

• Adjustable dynamic anti-skate control

• Professional anti-resonance, die-cast aluminum platter with rubber mat

• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus

• AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

• Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest

• Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer

• Built-in switchable phono pre-amplifier for phono or line-level output

• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

• Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Type	Belt-drive manual turntable
Motor	DC servo motor w/speed stability control
Drive Method	Belt drive
Speeds	33-1/3 RPM, 45 RPM
Turntable Platter	Die-cast aluminum
Wow and Flutter	< 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio	>60dB
Output Level	Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec  Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	35 dB nominal, RIAA equalized
Power Supply Requirements	100-240 V, 50/60 Hz, 0.5 A Max.
Power Consumption	110 V 60 Hz  Working: 1.1 W  Motor off: 1.0 W  Power off: 0.1 W
Dimensions	420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
Weight	4.72 kg (10.40 lbs.) without dust cover
Accessories Included	Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge, 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9')) (AD-SA1205WE), Dust cover hinges

Tonearm type: Static balanced straight carbon tonearm 
Effective arm length: 223.6 mm 
Overhang: 18.6 mm 
Tracking error angle: <2 degrees 
Applicable cartridge weight: 12-17 g 
Stylus pressure adjustment range: 0-3 g 
AC Adapter: 12 V, 0.5 A 
Replacement Stylus: AT-VMN95E