Description
The AT33MONO is designed specifically for use with mono
vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper
by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates
electrical signal with horizontal movement, yet it also has appropriate
compliance in the vertical direction, making it safe for use with stereo
records. The cartridge’s 0.65 mil conical stylus is mounted on a hard duralumin
cantilever for excellent sound reproduction and dependable performance. Because
the AT33MONO does not easily pick up unnecessary strain components from
distorted or scratched records, it produces mono audio of a much higher quality
than that generated by a stereo cartridge. The cartridge features a strong,
rigid body and incorporates Hanenite rubber in the interior and cantilever
fulcrum support to eliminate unnecessary vibrations.
- Dual
moving coil cartridge designed specifically for use with mono vinyl
records.*
- 0.65
mil conical stylus is mounted on a hard duralumin cantilever
- Strong,
rigid body construction
- Hanenite
anti-vibration, high-damping rubber in the housing interior and cantilever
fulcrum support eliminates unnecessary vibrations
- PCOCC
(Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
- High-quality
brass fastening screw
- Compatible
with stereo playback systems
* This cartridge with 0.6 mil conical stylus is not
compatible with SP (standard play) shellac records. It is designed to play
microgroove 33-1/3 and 45 RPM vinyl records.
|
Frequency Response |
20-20,000 Hz |
|
Vertical Tracking Angle |
23° |
|
Vertical Tracking Force |
2.3-2.7 g (2.5 g standard) |
|
Recommended Load Impedance |
More than 100 ohms (when head amplifier is connected) |
|
Coil Impedance |
10 ohms (1 kHz) |
|
DC Resistance |
10 ohms |
|
Coil Inductance |
28 µH (1 kHz) |
|
Output |
0.35 mV (at 1 kHz, 5 cm/sec) |
|
Stylus Shape |
0.65 mil conical |
|
Stylus Type |
Nude square shank |
|
Cantilever |
Duralumin pipe |
|
Static Compliance |
20 x 10-6 cm/dyne |
|
Dynamic Compliance |
6 x 10-6 cm/dyne (100 Hz) |
|
Mount |
Half-inch |
|
Weight |
6.9 g (0.24 oz) |
|
Dimensions |
16.0 mm (0.63″) H × 16.6 mm (0.65″) W × 26.5 mm |
|
Accessories Included |
Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge |
Reviews
There are no reviews yet.