Audio-Technica AT33EV Elliptical Nude Dual MC Phono Cartridge

/


Free Lifetime Technical Assistance

PRE-OWNED

  • $349.99

  • $469.00


Audio-Technica AT33EV Elliptical Nude Dual MC Phono Cartridge

PREOWNED - FULLY TESTED - INCLUDES ORIGINAL BOX, MANUAL, NEEDLE GUARD, SCREWS, HEADSHELL WIRES

AT33EV Moving Coil Cartridge
The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model.
The A33EV is a ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.
  • Elliptical stylus chip and durable duralumin tapered pipe cantilever
  • 10O mid impedance specifications
  • Dramatically increased magnetism with neodymium magnets and PCOCC as the coil
  • High separation, wide-response dual moving coil
  • VC Mold eliminates unnecessary vibrations
  • "Hanenite" anti-vibration rubber eliminates unwanted vibrations
“Minimises unnecessary vibration”
‘Hanenite’ is used in the housing interior and the cantilever fulcrum support to minimize unnecessary vibration, to allow the outstanding basic performance of the dual moving coil to fully express itself.
“Ability to richly reproduce sounds”
Elliptical stylus chip, embedded into a hard duralumin tapered pipe cantilever, has the ability to richly reproduce sounds in the medium and low ranges. With its outstanding machine strength, the duralumin cantilever is tough enough for the job and produces natural sounds without distortion.

Cartridge & Stylus

 

Frequency Response

15 - 50,000Hz

Channel Separation

30dB (1kHz)

Vertical Tracking Angle

23°

Stylus Construction

Nude Square Shank

Recommended Load Impedance

More than 100Ω (when head amp connected)

Coil Impedance

10Ω (1kHz)

DC Resistance

10Ω

Coil Inductance

22µH (1kHz)

Output Voltage

0.3mV (1kHz and 3.54cm/sec.)

Output Channel Balance

0.5dB (1kHz)

Stylus Shape

Elliptical

Cantilever

Duralumin

Static Compliance

40×10-6cm/dyne

Dynamic Compliance

10×10-6cm/dyne (100Hz)

Mounting

1/2" Centers

Dimensions

H16×W16.6×D26.5mm

Accessories Included

Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1

Body Material

Aluminium/Synthetic Resin

Stylus Curvature Radius

0.3 x 0.7 mil

Terminal Pins

Brass

Type

Dual Moving Coil

Weight

6.9g