Audio-Technica AT-LP60XHP-GM Fully-Auto Belt-Drive Turntable with Headphones (Gun-Metal/Black)

$199.00

Free Lifetime Technical Assistance
SKU: AT-LP60XHP-GM Gun-Metal/Black

Description

The AT-LP60XHP turntable and headphones combination lets you
enjoy your 33-1/3 and 45 RPM records with no additional equipment required.
Based on the AT-LP60X fully automatic belt-drive turntable, the AT-LP60XHP adds
an integrated headphone amplifier with a 3.5 mm (1/8″) headphone jack and
volume control on the front panel, so all you have to do is plug in the
included ATH-250AV over-ear headphones (or other headphones of your choice) and
start the records spinning. 

Of course, the turntable can also be connected to your
stereo, powered speakers, computer or other components and used as a standard
turntable. The detachable RCA output cable (3.5 mm male to dual RCA male) and
built-in switchable phono preamp allow the turntable be connected to components
with and without a dedicated phono input. Like the AT-LP60X, the AT-LP60XHP features
a redesigned tonearm base and headshell to improve tracking and reduce
resonance. Noise is further reduced by the inclusion of an AC adapter that
moves the AC/DC conversion outside of the chassis where its impact on the
signal chain is limited. 

Audio-Technica has been a leader in phono cartridge design
for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual
Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the
headshell for assured performance and ease of setup. 

The ATH-250AV headphones are equipped with 40 mm drivers for
clear mid- and low-frequency reproduction. The lightweight construction and
comfortable, isolating earpads allow you to listen for as long as you like, and
the 3.5 m (11.5′) cable gives you plenty of flexibility. 

The turntable comes with a 45 RPM adapter and a removable
hinged dust cover.

  • Experience
    the high-fidelity audio of vinyl
  • Fully
    automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Integrated
    headphone amplifier with front-panel 3.5 mm (1/8″) headphone jack and
    volume control
  • ATH-250AV
    over-ear headphones with 40 mm drivers, 3.5 m (11.5′) cable and 3.5 mm
    (1/8″) stereo mini-plug
  • Anti-resonance,
    die-cast aluminum platter
  • Redesigned
    tonearm base and headshell for improved tracking and reduced resonance
  • Integral
    Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
  • AC
    adapter handles AC/DC conversion outside of the chassis, reducing noise in
    the signal chain
  • Built-in
    switchable phono pre-amplifier for phono- or line-level output
  • Includes:
    ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA
    male), 45 RPM adapter, and removable hinged dust cover

Type

Belt drive turntable, fully automatic

Motor

DC servo-controlled

Speeds

33-1/3 RPM, 45 RPM

Turntable Platter

Aluminum

Wow and Flutter

Less than 0.25% (WTD) @ 3 kHz (JIS)

Signal-to-Noise Ratio

>50 dB (DIN-B)

Output Level

Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec 
Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain

36 dB nominal, RIAA equalized

Power Supply Requirements

120V AC, 60 Hz, 3W

Dimensions

359.5 mm (14.15″) W x 97.5 mm (3.84″) H x 373.3
mm (14.70″) D

Weight

1,82 W

Accessories Included

3.5 mm (1/8″) mini-plug (male) to dual RCA (male)
output cable; 45 RPM adapter; removable hinged dust cover


Replacement Stylus: ATN3600L 

Headphones 
Type: Closed-back Dynamic 
Driver Diameter: 40 mm 
Frequency Response: 18 – 22,000 Hz 
Maximum Input Power: 500 mW 
Sensitivity: 102 dB/mW 
Impedance: 43 ohms 
Weight: 97 g (3.4 oz), without cable 
Cable: 3.5 m (11.5′) 
Connector: 3.5 mm (⅛”) stereo mini-plug

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.