Audio-Technica AT-LPW30BKR Fully Manual Belt-Drive Turntable (Black)

/


Free Lifetime Technical Assistance
  • $329.00



AT-LPW30BK

The AT-LPW30 is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with black wood veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30 is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Optimal High-Fidelity Audio Reproduction

Stylish Wood Turntable

A stunning addition to any system, the AT-LPW30 features an anti-resonance plinth with black wood veneer to limit low-frequency acoustic feedback.

Plays 33-1/3 and 45 RPM Records

Built-in Switchable Phono Pre-Amplifier

Straight Aluminum Tonearm

AT-VM95C Dual Magnet™ Phono Cartridge

Sophisticated Styling

Audio Aesthetics

The LPW30 was designed to give you optimal high-fidelity audio reproduction from vinyl, with sophisticated styling.

Cartridge Assembly Line Circa 1962

Over 60 Years of Analog Excellence

We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

Features

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminum platter with rubber mat
  • AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
  • AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Specifications

Turntable

 

Type

2-speed, fully manual operation

Motor

DC servo motor

Drive Method

Belt-drive

Speeds

331/3 RPM, 45 RPM

Turntable Platter

Die-cast aluminum

Wow and Flutter

< 0.15% WRMS (33RPM) at 3kHz

Signal-to-Noise Ratio

> 60dB

Output Level

Pre-amp: PHONO: 4.0mV nominal at 1kHz, 5cm/sec
Pre-amp: LINE: 200mV nominal at 1kHz, 5cm/sec

Phono Pre-Amp Gain

35 dB nominal, RIAA equalized

Power Supply Requirements

100 to 240V, 50/60Hz

Dimensions

116.9 x 420.0 x 340.0 (H x W x Dmm)

Weight

5 kg

Accessories Included

AT-HS4SV Headshell
AT-VM95C Dual Moving Magnet Cartridge with Conical Stylus
Detachable RCA output cable (dual RCA male to dual RCA male)
AC adapter
45 RPM adapter
Counterweight
Rubber mat
Removable hinged dust cover

AC Adapter

12 V, 0.5 A

Tonearm Type

Static balanced straight aluminum pipe tonearm

Effective Arm Length

223.6 mm

Overhang

18.6 mm

Tracking Error Angle

<2 degrees

Applicable Cartridge Weight

12-17 g

Replacement Stylus

AT-VMN95C

Notes

Stylus pressure adjustment range: 0-3 g