Audio-Technica AT-OC9XEB Dual Moving Coil Cartridge

Save up to 30% w/many A.T. MC cartridges in trade !

$259.00

Free Lifetime Technical Assistance
SKU: AT-OC9XEB

Description

The AT-OC9XEB Dual Moving Coil cartridge with bonded
elliptical stylus is designed to provide outstanding channel separation. The
Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio
transmission and are aligned in a reverse V-shaped formation to exert less
pressure on the stylus, thereby minimizing distortion. Audio quality is further
enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet
and pure iron yoke that increase the magnetic energy, and the bonded elliptical
stylus on an aluminum cantilever that accurately tracks the record groove. The
cartridge body has been pre-threaded, enabling it to be mounted to a headshell
or integral tonearm with just two screws – no nuts required.

  • Dual
    moving coil design, featuring independent coils for both left and right
    channels, provides outstanding channel separation
  • The
    coils are aligned in a reverse V-shaped formation, which exerts less
    pressure on the stylus, thereby minimizing distortion
  • The
    cartridge body is pre-threaded, enabling it to be mounted onto the
    headshell or integral tonearm with just two screws – no nuts required
  • Features
    a bonded elliptical stylus and aluminum cantilever
  • A
    neodymium magnet and pure iron yoke provide increased magnetic energy
  • Aluminum
    body minimizes unwanted vibration for reduced resonance and superior audio
    reproduction
  • Pure
    copper by Ohno Continuous Casting process (PCOCC) is used for the coils to
    achieve pure signal transfer

Type

Dual
Moving Coil

Body
Material

Aluminum

Frequency
Response

20-30,000
Hz

Channel
Separation

25 dB
(1 kHz)

Vertical
Tracking Angle

20°

Vertical
Tracking Force

1.8-2.2
g (2.0 g standard)

Recommended
Load Impedance

Min.
100 ohms (when head amplifier is connected)

Coil
Impedance

12 ohms
(1 kHz)

DC
Resistance

12 ohms

Coil
Inductance

25 mH
(1 kHz)

Output

0.32 mV
(at 1 kHz, 5 cm/sec)

Channel
Balance

1.5 dB
(1 kHz)

Stylus
Shape

Elliptical
bonded

Stylus
Type

Bonded
round shank

Stylus
Curvature Radius

0.3 x
0.7 mil

Cantilever

Aluminum
pipe

Static
Compliance

20 x
10-6 cm/dyne

Dynamic
Compliance

9 x
10-6 cm/dyne (100 Hz)

Wire
Used for Coil

PCOCC

Terminal
Pins

Brass

Mount

Half-inch

Weight

7.6 g
(0.3 oz)

Dimensions

17.3 mm
(0.68″) H × 16.8 mm (0.66″) W × 25.7 mm (1.01″) D

Accessories
Included

Non-magnetic
screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10
mm x 2, 12 mm x 2); plastic protector; brush

Mounting Feature: Threaded body

Note: moving
coil cartridges require receivers or preamps with compatible inputs; their
stylus assemblies are not field-replaceable.

Additional information

Weight 0.00000000 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.