Description
IN SILVER – INCLUDES BUILT-IN HEADPHONE AMP w/1/4″
headphone jack
Its meticulously selected SMD components are assembled by hand in Erlangen
and tested several times. The reward of these efforts is a signal to noise
ratio of up to 84 decibels. The input impedance is set using plug-in links, so
there is no loss of quality when using different moving magnet and moving coil
cartridges.
The nano phono headphone V2 additionally contains a powerful headphone
amplifier within the solid aluminium housing for private listening at the
highest fidelity.
|
AMPLIFICATION @ 1 KHZ |
34 dB to 48 dB (MM mode) |
|
INPUT LOAD |
47 kOhm / 220 pF / MM mode |
|
MM / MC INPUT |
switchable by jumper (at bottom) |
|
SUBSONIC FILTER |
switchable (at bottom) |
|
RIAA |
delay time: 75 μs / 318 μs / 3180 μs |
|
RIAA ACCURACY |
± 0.4dB |
|
THD |
0,04% |
|
SIGNAL TO NOISE RATIO |
81 dB (A) (MM – Mode) |
|
CHANNEL SEPARATION |
> 80dB (1kHz) |
|
MAX. OUTPUT VOLTAGE |
10V eff. (1kHz), 0-10 adjustable |
|
POWER SUPPLY |
±18V DC (external wall power supply, plastic housing) |
|
OUTPUT CONNECTIONS |
Asymmetrical (RCA) |
|
POWER CONSUMPTION |
Max. consumption: 2.3 Watt |
|
WEIGHT |
Approx. 500 g (preamp and power supply) |
|
DIMENSIONS (W/D/H in inches) |
3.35 x 4.17 x 0.98 |
|
DIMENSIONS (W/D/H in mm) |
85 x 106 x 25 |
Reviews
There are no reviews yet.