Tannoy CVS4 In-Ceiling Speaker (Each)


  • Brand: Tannoy
  • Product Code: CVS4

Free Lifetime Technical Assistance
  • $139.00

Request Trade-In Price

The compact, small footprint CVS 4 is a 100mm (4") full bandwidth blind mount model, specifically designed for all applications requiring the combination of excellent sonic quality for music and speech reinforcement,exceptional reliability and most critically - affordability.

The CVS 4 is supplied with an integral zinc-plated steel back can, with recessed termination box, the removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. The drive unit itself is mounted in a vented, injection moulded, paintable front baffle manufactured from UV / weather resistant UL94V-0 ABS material.

An integral low insertion loss 30 W line transformer uses an easily accessible front baffle mounted rotary tapping switch to select between low impedance and 70 V or 100 V operation.

  • Coaxially mounted 100mm (4") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter
  • High power & high sensitivity with extended frequency response and very low distortion
  • Wide, controlled constant directivity dispertion for optimum coverage
  • UV/weather resistant UL94V-0 ABS front baffle
  • Easily accessible tapping switch on front baffle
  • Low insertion loss 30 W line transformer
  • Ferrofluid cooled neodymium HF
  • Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics
Frequency Response (-3dB) (1) 85Hz - 19kHz
Frequency Range (-10dB) (1) 77Hz - 22kHz
System Sensitivity (1W @1m) (2) 87dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 102 degrees conical
Directivity Factor (Q) 5.6 averaged 1kHz to 6kHz
Directivity Index (DI) 7.1 averaged 1kHz to 6kHz
Rated Maximum SPL Average: 103dB
peak: 109dB
Power Handling (3) Average: 40W
Programme: 80W
Peak: 160W
Recommended Amplifier Power 80W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch) 70V: 30W / 15W / 7.5W / 3.75W / OFF & low impedance operation
100V: 30W / 15W / 7.5W / OFF & low impedance operation
Crossover 2.7kHz
Low Frequency 100mm (4.00") mineral loaded cone
High Frequency 19mm (0.75") coaxially mounted
Enclosure Back Can: Zinc plated steel
Baffle: UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22mm
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings UL-1480, UL-2043, CE
Hole Cutout Diameter 180mm (7.09")
Dimensions Bezel diameter: 213.0mm (8.39”)
Front of ceiling to rear of back can: 202.5mm (7.97”)
Front of ceiling to top of safety loop: 214.90mm (8.46")


Net Weight (ea) 2.60kg
Included Accessories C Ring
Tile bridge
Paint mask
Cutout template
Optional Accessories Plaster (mud) ring