The compact, small footprint CVS 6 is a 150mm (6") full bandwidth blind mount model, specifically designed for all applications requiring the combination of excellent sonic quality for music and speech reinforcement,exceptional reliability and most critically - affordability.
The CVS 6 is supplied with an integral zinc-plated steel back can, with recessed termination box, the removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit. The drive unit itself is mounted in a vented, injection moulded, paintable front baffle manufactured from UV / weather resistant UL94V-0 ABS material.
An integral low insertion loss 60 W line transformer uses an easily accessible front baffle mounted rotary tapping switch to select between low impedance and 70 V or 100 V operation.
- Coaxially mounted 150mm (6") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter.
- High power & high sensitivity with extended frequency response and very low distortion
- Wide, controlled constant directivity dispertion for optimum coverage.
- UV/weather resistant UL94V-0 ABS front baffle
- Easily accessible tapping switch on front baffle.
- Low insertion loss 60 W line transformer
- Ferrofluid cooled neodymium HF
- Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics
|Frequency Response (-3dB) (1)||79Hz - 21kHz|
|Frequency Range (-10dB) (1)||60Hz - 24kHz|
|System Sensitivity (1W @1m) (2)||91dB (1W = 2.45V for 6 Ohms)|
|Nominal Coverage Angle||90 degrees conical|
|Coverage Angle (1kHz to 6kHz)||93 degrees conical|
|Directivity Factor (Q)||7.7 averaged 1kHz to 6kHz|
|Directivity Index (DI)||8 averaged 1kHz to 6kHz|
|Rated Maximum SPL||
|Power Handling (3)||
|Recommended Amplifier Power||120W @ 6 Ohms|
|Nominal Impedance||6 Ohms|
|Transformer Taps (via front rotary switch)||
70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation
100V: 60W / 30W / 15W / OFF & low impedance operation
|Low Frequency||150mm (6.00") mineral loaded cone|
|High Frequency||19mm (0.75") coaxially mounted|
Back Can: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
|Safety Features||Safety ring located at rear of enclosure for load bearing safety bond|
|Clamping Design||Security toggle clamp|
|Cable Entry Options||Cable clamp & squeeze connector for conduit up to 22mm|
|Connectors||Removable locking connector with screw terminals with "loop through" facility|
|Safety Agency Ratings||UL-1480, UL-2043, CE|
|Hole Cutout Diameter||250mm (9.84")|
Bezel diameter: 279.5mm (11.01”)
Front of ceiling to rear of back can: 246.5mm (9.70”)
Front of ceiling to top of safety loop: 258.5mm (10.18”)
|Net Weight (ea)||4.75kg|