Yamaha A-S2000 Integrated Amplifier

/

  • Brand: Yamaha
  • Product Code: A-S2000

Free Lifetime Technical Assistance
  • $1,999.95

  • $2,499.95

Available Options

Yamaha Introduces a New, Superior Approach to Analog Amplifier Design. This high performance amplifier with balanced inputs brings out the best of other components in the system.

A-S2000 Natural Sound Stereo Amplifier

HiFi Began with Yamaha...
Yamaha's involvement with and passion for music goes back more than a century, to when we built our first reed organ in 1887. Now we are the world's leading producer of pianos and other musical instruments, and are involved with music in many other ways as well. We manufacture professional recording equipment, we design concert halls and we assist artists at concerts with set up and sound tuning. This knowledge and experience benefits our production of audio components in many ways. We introduced our first HiFi (High Fidelity) turntable in 1954, becoming the first company to actually use the term “HiFi.” Thereafter we were one of the first to offer mass-produced, high quality audio equipment, and introduced many legendary stereo components. We hope you enjoy the genuine HiFi experience of Yamaha Natural Sound.

MAIN FEATURES

  • Full Floating and Balanced Circuit Design Achieves for the First Time the Full Potential of Analogue Amplification
  • Full-Stage Balanced Signal Transmission
  • Floating Balanced Power Amp
  • Fully Balanced Control Amp
  • Parallel Volume and Tone Controls
  • Symmetrical Construction
  • Specially Designed Feet
  • Headphone Amp for Low Impedance Drive
  • Discrete Phono Amp

 

Maximum Power

(4 ohms, 1 kHz, 0.7 % THD, for Europe) 160 W + 160 W / (8 ohms, 1 kHz, 10% THD) 120 W + 120 W / (4 ohms, 1 kHz, 10% THD) 190 W + 190 W

Minimum RMS Output Power

(8 ohms, 20 Hz—20 kHz, 0.02% THD) 90 W + 90 W / (4 ohms, 20 Hz—20 kHz, 0.02% THD) 150 W + 150 W

Dynamic Power/Channel

(8/6/4/2 ohms) 105 W/135 W/190 W/220 W

Damping Factor

(8 ohms, 1 kHz) 160

Input Sensitivity/ Impedance

CD, etc. 150 mV/47 k-ohms / Phono MM 2.5 mV/47 k-ohms / Phono MC 100 μV/50 ohms / Main In 1 V/47 k-ohms

Frequency Response

CD,etc. to Speaker Out, Flat Position 5 Hz—100 kHz +0 dB/-3 dB / CD,etc. to Speaker Out, Flat Position 20 Hz—20 kHz,+0 dB/-0.3 dB

RIAA Equalization Deviation

Phono MM 20 Hz—20 kHz, ±0.5 dB / Phono MC 20 Hz—20 kHz, ±0.5 dB

Total Harmonic Distortion (20 Hz–20 kHz)

CD Balanced to Speaker Out 0.01% (90 W/8 ohms) / CD, etc. to Speaker Out 0.015% (90 W/8 ohms) / Phono MM to Rec Out 0.005% (2 V) / Phono MC to Rec Out 0.05% (2 V)

Signal-to-Noise Ratio [IHF-A Network]

CD, etc. (S: 150 mV, Input Shorted) 98 dB / Phono MM (S: 5 mV, Input Shorted) 93 dB / Phono MC (S: 500 μV, Input Shorted) 85 dB

Residual Noise

(CD, etc., IHF-A-Network)

Channel Separation (1 kHz/10 kHz)

CD, etc., Input 5.1 k-ohms Terminaled 74 dB/54 dB / Phono MM, Input Shorted, Vol: -30dB 90 dB/77 dB / Phono MC, Input Shorted, Vol: -30dB 66 dB/77 dB

Tone Control Characteristics

Bass Boost/Cut (at 50 Hz) ±9 dB / Bass Turnover Frequency 350 Hz / Treble Boost/Cut (at 20 Hz) ±9 dB / Treble Turnover Frequency 3.5 kHz

Audio Muting

-20 dB (approx.)

Load Impedance

Speaker A or B 4 ohms to 16 ohms / Speaker A + B 8 ohms to 16 ohms

Dimensions (W x H x D)

435 x 137 x 465 mm (17-1/8” x 5-3/8” x 18-5/16”)

Weight

22.7 kg (50 lbs.)