Oracle Audio Paris PH200 Phono Preamplifier


Free Lifetime Technical Assistance

Contact Us to Purchase

  • $1,595.00

Available Options

The distinctive design of the Paris PH200 with its elegantly sculpted chassis carries the unique signature of the Paris series. The secret behind the overall tonal balance and performance of the Paris phono preamplifier lies in the careful selection and combination of the different components. The internal circuitry of the Paris PH200 is a two stage design. The first stage has for role to amplify the faint signal coming from the phono cartridge in order to present the signal with an acceptable level to the straightening RIAA curve circuit. The second stage has for role to amplify the signal to the required output level of the PH200. Both amplifying stages were designed such that they optimize the signal to noise ratio of the PH200 which results in a very rapid and high dynamic contrast giving to the Ph200 all its musicality!

The  Paris PH200 distinguishes itself from the PH100 as it is equiped with an additional signal regulation step  located just before the RIAA circuit input and also by the usage of higher quality operational amplifiers on the analog amplifying modules further improoving the sound. The last of these distionctions and not the least is the usage of a highly regulated and filtered external power supply. Extreme care and attention has been applied to eliminate the electrical line noise before it can access the Paris phono stage circuitry. The PH200 has been designed to accomodate usage of both moving coil and moving magnet phono cartridges. The PH200 offers variable moving coil cartridge load settings and variable gain using jumper configurations  on both the left and right channels. The different values of load impedance and gain that are possible are listed on the technical specifications page of the PH200. The Paris PH200 will bring you to a re-discovery of your record collection and will provide countless hours of enjoable and satisfying musical experience!

Frequency response :                                                20Hz - 20KHz @ +/- 1dB
Total Harmonic Distortion :                                       0,05% @ 20Hz – 20kHz
MC - Moving Coil input impedence :                      100, 200, 511, 1k, 1.5K and 47k Ohms
MM -  Moving Magnet  input impedence :              47k Omhs
Input capacitance (moving magnet)                              150pF
Input sensitivity :                                                          0,2mV and up
Gain MC :                                                                       41.5db, 52db, 62db
Gain MM:                                                                      must be set at 41.5 @ 47k Omhs                                                              
Signal to noise ratio :                                                 > -80dB
Dimensions :                                                                  9.5" X 12.25" X 2.25"